Better products start with better ingredients.

Sold as a liquid product of ~ 50% concentration. Based on C9-11 oxo alcohol. Has high primary cleaning, excellent gloss retention (low to no streak) and excellent plastic compatibility.

Sold as yellowish brown liquid. Protects colors, fragrances, natural compounds etc. from photolytic or photooxidative degradation.

Foam stabilizer, viscosity builder, boost cleaning on oily soils and corrosion inhibitor. No free DEA. Solid at room temperature.

Boost cleaning on oily soils and provides corrosion inhibition and lubrication.

A nonionic surfactant with marked wetting and emulsifying power, has a cloud point of 54°C. It is intended for use in all kinds of household and institutional cleaners and suited for use as a substitute for nonylphenol ethoxylates in many cleaners. Listed on safer choice.

Non-ionic surfactant, described as modified fatty alcohol polyglycol ether. Is a white to yellowish solid at room tempertaure and becomes clear liquid at 40 C. It has very low foam.

Low foam surfactant. For powder/solid formulations only. For powder/tablet detergent formulations, allows "detergent plus rinse aid claim" due to carry over from wash to rinse.

Low foaming non-ionic surfactant with a cloud point of 10 °C. Excellent for extraction cleaning. Suitable for low temperature cleaning (Less than or equal to 45°C). Good performance for cleaning and foam control. Synergy with Plurafac® LF 120. Listed on EPA’s Safer Chemical Ingredients List.

Good performance for cleaning and foam control. Suitable for high temperature cleaning (greater than 60°C). Cloud point is 30°C and so very low foaming above that temperature, which is ideal for carpet extraction operating temperatures, which is typically 35 to 50°C. Listed on EPA’s Safer Chemical Ingredients List.

Flex low-foaming nonionic surfactant; sold as a liquid; Good performance for cleaning and foam control. Suitable for high temperature cleaning (greater than 60°C). Cloud point is 30°C and is very low foaming above that temperature, which is ideal for carpet extraction operating temperatures, which is typically 35 to 50°C.

It has a cloud point of 30 C. Has great caustic stability; won't yellow when in direct contact with NaOH beads or formulated in high caustic formulations.  Listed on EPA’s Safer Chemical Ingredients List.

Dehypound® Dry Car Care is a car cleaning product that use a low quantity of water. With Dehypound® Dry Car Care you can clean cars of different dimensions with only 10 mL of product and 200 mL of water, removing inlays of mud, dirt, insects and all kinds of dirt.

1% active (RTU) in water can out preform the performance of APC commercially available. No need for any solvent or builder as it preforms good by itself. The performance goes down, when Glycol ether solvents are used. So avoid using it. Surfactant is mild to plastics.All non-ionic synergistic blend, which is per-oxide stable. Ideal for carpet spot cleaners. Listed on EPA’s Safer Chemical Ingredients List.

Dehypound® HDG is a non-ionic surfactant blend with excellent multi-soil heavy duty cleaning and degreasing performance. The compatibility of versatile Home Care and I&I blend with nonionic, anionic, cationic (including quaternary) and amphoteric surfactants, as well as strong acids and strong alkalis provides you amazing formulating flexibility for wide variety of applications from Industrial to Food Service and many more. Dehypound® HDG is your solution to exceptional performance, easier formulating and new opportunities.

Dehypound® M is a high performance, sustainable non-ionic surfactant blend. The versatility of this multi-soil and multi-application blend allows you to use this in all-purpose cleaners with environmental claims in Home Care to car wash cleaners in I&I. Due to the performance of Dehypound M you can have powerful cleaning without solvent. The low film and streak performance also makes this an ideal candidate for hard surface cleaners. The formulation options this blend enables also includes a variety of dispensing possibilities due to the foam profile. A sustainable high performing blend means a solution that offers formulation flexibility and can help you simplify your ingredient portfolio due to the elimination or need for solvents and additional hydrotropes in your finished formulation.

Dehypound® VTS is a high-performance silicone replacement for vehicle and transportation shine. This exterior cleaning formulation is readily biodegradable and is Safer Choice listed.

Dehyquart CSP is a biodegradable cationic surfactant, ideal for vehicle polish, shine and protection for wax type formulations. Provides a quick and easy drying effect easily observed in wind tunnel installations; making vehicle surface more hydrophobic. Leaves a long-lasting gloss effect on vehicles, the result of water and spot-repelling agents.

Sold both as 35% (as Dehyton PK 35) and 45% Liquid. Mild surfactant, with moderate hydrotrope ability a high foam. Can function as a Foam stabilizer. Water based and has excellent acid stability.  Listed on EPA’s Safer Chemical Ingredients List.

Sold both as 35% (as Dehyton PK 35) and 45% Liquid. Mild surfactant, with moderate hydrotrope ability a high foam. Can function as a Foam stabilizer. Water based and has excellent acid stability.  Listed on EPA’s Safer Chemical Ingredients List.

Thickener for acidic systems. Highly effective on mineral acids. Has shown excellent primary cleaning on certain soils. It mixes into solution up to 3 times faster than other competitive thickeners and so provides improved/lower processing time. It is compatible with all types of anionic, cationic and amphoteric surfactants.

DERIPHAT® 160 C is an amphoteric surfactant for cleaners which is sold as 30% liquid. The product exhibits very good foaming power in hard and soft water. Its stability over a broad pH range allows its use in acidic and alkaline formulations. DERIPHAT® 160 C can be combined with cationic surfactants which are often used as bactericides for disinfectants. DERIPHAT® 160 C is a strong hydrotrope with excellent water solubility over a broad pH range even when high electrolyte concentration is present. DERIPHAT® 160 C is compatible with other common nonionic, anionic and cationic surfactants. Insoluble in water in the pH range 2.4 to 4.2. Listed on EPA’s Safer Chemical Ingredients List.

It is an O/W emulsion concentrate that effectively removed oily soils from surfaces. It is easily diluted and can provide one step cleaning and conditioning of leather.

Short chain APG and sold as a liquid of concentration 63.5%. This mid-chain APG surfactant has moderate hydrotrope ability and high foam with good primary cleaning. 100% derived from renewable resources. Primary function is a mild Degreaser and a foaming/stabilizing surfactant. It won't damage even floor finishes. Has excellent gloss retention (low to no streak) and excellent plastic compatibility. Contains no biocide for preservation. Listed on EPA’s Safer Chemical Ingredients List and approved for direct release to the environment.

Sold as a ~50% liquid. This mid-chain APG surfactant has moderate hydrotrope ability and a high foam with good primary cleaning. 100% derived from renewable resources. Mild to skin and also can synergistically reduce the skin irritation caused by anionic surfactants. It has excellent gloss retention (low to no streak) and excellent plastic compatibility. Primary function is a mild Degreaser and a foaming/stabilizing surfactant. Stable at high alkaline conditions, has excellent wetting. Has high foam and so may need a defoamer. Contains no biocide for preservation. Listed on EPA’s Safer Chemical Ingredients List.

Mid-chain APG surfactant with moderate hydrotrope ability and high foam with good primary cleaning. 100% derived from renewable resources. Has excellent gloss retention (low to no streak) and excellent plastic compatibility. It won't damage even floor finishes. Stable at high alkaline conditions. Excellent option for wetting. Would need to use it with a defoamer.

It is an alkyl polyglycoside on inorganic and organic carrier. This product is a granular APG® for the detergent and cleaner market. The manufacturing of this product is based on fluidized bed technology and the resulting granule structure allows the smooth addition of Glucopon 50 G into tablet or powder formulations.  Listed on EPA’s Safer Chemical Ingredients List.

Long chain APG surfactant, sold as a ~50% viscous liquid, works in combination with fatty soap for this application. Primary function as a mild Degreaser and a foaming/stabilizing surfactant. Mild to skin and also can synergistically reduce the skin irritation caused by anionic surfactants. Has synergy with Lactic acid to increase the dish clean plate count. Contains no biocide for preservation. Listed on EPA’s Safer Chemical Ingredients List.

Long chain APG surfactant, sold as a ~50% viscous liquid. This long-chain APG surfactant has a primary function as a mild Degreaser and a foaming/stabilizing surfactant. Listed on safer choice. 100% natural carbon. Mild to skin and also can synergistically reduce the skin irritation caused by anionic surfactants. Has synergy with Lactic acid to increase the dish clean plate count. Contains no biocide for preservation. Listed on EPA’s Safer Chemical Ingredients List.

Sold as a clear liquid of concentration 85%, this optimized blend uses the advantage of synergy between natural alcohol ethoxylates and 2-PH surfactants. Presence of water provides the advantage of better phase stability. It has a cloud point of 53 °C and HLB of 12.4 Listed on safer choice. Final surfactant choice is dependent on formulation.

Sold as a clear-hazy liquid of concentration 85%, this optimized blend uses the advantage of synergy between natural alcohol ethoxylates and 2-PH surfactants. Presence of water provides the advantage of better phase stability. It has a cloud point of 53 °C and HLB of 13.6 Listed on safer choice. Final surfactant choice is dependent on formulation.

Great caustic stability; won't yellow in direct contact with NaOH beads. May need a defoamer.

Sold as a clear yellow/brown liquid. Recommended for neutral to alkaline conditions. Readily biodegradable. Soluble in alcohols and dilute caustic solutions (i.e. 10% soluble in 5% caustic solution)

Recommended for acidic conditions. Excellent protection in acidic media, especially HCl. Not sensitive to water hardness. High stability in peracidic media. Low hydrogen-induced embrittlement of steel. Soluble in water and organic solvents. Readily biodegradable.

Recommended for acidic conditions. Readily biodegradable. Good protection in acidic media, especially HCl. Not sensitive to water hardness. High stability in peracidic media. Soluble in water and organic solvents.

BASF liquid protease Lavergy® Pro 106 L/LS has a higher plateau of performance over the dose-response curve compared to the leading market-relevant proteases.

“Less is more- for a sustainable future”, with our protease Lavergy® Pro 114 LS, we offer you a protease with an excellent non-boron stabilization technology. ​The protease displays high wash-performance already at low temperature, it shows very good stability for the protease itself and allows good secondary enzyme stability and in addition, there is no preservative added to our product. ​Lavergy® Pro 114 LS fulfils your innovation and sustainability goals at once. ​At BASF we want to create value through innovation. ​

High performing protease enzyme, unstabilized

High performing protease enzyme, stabilized

Sold as a liquid of 100% concentration or as Lutensol® TO 89 (90% solution). The hydrophobe is based of saturated iso-C13 alcohol with moderately branching and has a cloud point of 60°C.

Sold as a clear colorless liquid of 100% activity. Good solubilizer, penetrating agent and low foaming. It acts as a co-solvent or a co-surfactant. It has a cloud point of > 100 °C. Petroleum based non-ionic surfactant. Lutensol® AO 7 is the work horse in the category.

Sold as a clear colorless liquid of 100% activity. Good solubilizer, penetrating agent and low foaming. It acts as a co-solvent or a co-surfactant. It has a cloud point of > 100 °C.  Listed on EPA’s Safer Chemical Ingredients List.

Workhorse non-ionic surfactant for laundry, The hydrophobe is derived from a natural fatty Alcohol. Sold as ~ 100% active. The cloud point is 60°C. Listed on EPA’s Safer Chemical Ingredients List.

Flex workhorse non-ionic surfactant for commercial laundry. Sold as ~ 100% active. Excellent & rapid wetting, relatively low foam and good detergency, especially on oily soils. The cloud point is 58 °C.

Sold as a liquid of 100% concentration or as Lutensol® TO 89 (90% solution). It is suitable for both manual and machine floor cleaning. The hydrophobe is based of saturated iso-C13 alcohol with moderately branching. It is an effective NP 9 replacement in commercial laundry. It has a cloud point of 60°C It has moderate foam. Blends of Lutensol TDA 6 and 9 provide synergistic cleaning on dirty motor oil and dust sebum stains.

Sold as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low, when compared to regular Alcohol Ethoxylates with the same degree of ethoxylation. It has a HLB of 10.5 and listed on safer choice. Final surfactant choice would be formulation dependent.

Sold as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low as compared to regular Alcohol Ethoxylates with the same degree of ethoxylation. It has a HLB of 11.5. Final surfactant choice would be formulation dependent.

Sold both as a 100% active product and 85% aqueous solution (Lutensol XL 79). It has very fast dynamics and excellent detergency on oily soils. It has a lower tendency to form gel compared to longer chain alcohol ethoxylates. It has a HLB of 12.5 and listed on safer choice. Final surfactant choice would be formulation dependent.  Listed on EPA’s Safer Chemical Ingredients List.

Sold both as a 100% active product. It has very fast dynamics and excellent detergency on oily soils. Even, when used in low levels, can boost the degreasing power of the detergent without reducing the foam. It has a lower tendency to form gel compared to longer chain alcohol ethoxylates. It has a HLB of 13 and cloud point of 56 °C It is listed on safer choice. Final surfactant choice would be formulation dependent.

Sold both as a 100% active product, it will Improve the wetting and boost the degreasing power of a foam cleaner. Listed on safer Choice. It has very fast dynamics and excellent detergency on oily soils. It has a HLB of 14 and cloud point of 69 °C. Listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice would be formulation dependent.

Flex alcohol alkoxylate; Sold both as a 100% active product, it will Improve the wetting and boost the degreasing power of a foam cleaner. It has very fast dynamics and excellent detergency on oily soils. It has a HLB of 14 and cloud point of 69 °C. It is listed on safer choice

Sold as a 100% active product. It has a HLB of 10.5. Final surfactant choice would be formulation dependent. Listed on EPA’s Safer Chemical Ingredients List.

Sold both as a 100% active product and 85% aqueous solution (Lutensol XP 79). Good non-ionic emulsifier for oily soils. It is suitable for machine and manual floor cleaning as a low foaming degreasing agent. Very fast wetting and effective cleaning. Readily biodegradable. It has a lower tendency to form gel compared to longer chain alcohol ethoxylates. It has a HLB of 13 and listed on safer choice. Final surfactant choice would be formulation dependent.

Sold both as a 85% active product and 85% aqueous solution. HLB of 13. Listed on safer choice.

Sold both as a 100% active product and 85% aqueous solution (Lutensol XP 89). It has very fast dynamics and excellent detergency on oily soils. Even, when used in low levels, can boost the degreasing power of the detergent without reducing the foam. It has a HLB of 14 and a cloud point of 56 °C. Very fast wetting and effective cleaning. Readily biodegradable. It has a lower tendency to form gel compared to longer chain alcohol ethoxylates. Listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice would be formulation dependent.

Sold both as a 100% active product, it will Improve the wetting and boost the degreasing power of a foam cleaner. It has very fast dynamics and good non-ionic emulsifier for oily soils. Listed on safer choice. It has very fast dynamics and excellent detergency on oily soils. It has a HLB of 14 and cloud point of 69 °C. Listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice would be formulation dependent.

Sold as 70% Liquid. High purity, Readily biodegradable, less corrosive strong acid, exhibiting a low vapor pressure and high dissolving capacity on many scales. Lutropur® MSA has synergy with certain acids and also Trilon® M (Chelating agent) on many scales. Excellent product for dye/pigment type soil. High purity, Readily biodegradable, less corrosive strong acid, exhibiting and a low vapor pressure.  Listed on EPA’s Safer Chemical Ingredients List.

Sold as liquid of concentration 85%. It can be used as a neutralizer/acidifier. It has high dissolving power on scales of different metals and is fully stable in non-oxidizing formulations. It is readily biodegradable.

Provides Fabric Rejuvenation. Sold at as a concentration ~ 39%

Lipid Layer Enhancer for Skin Care. Sold at a concentration ~ 34%. NOT AVAILABLE FROM ALL DISTRIBUTORS

Low foaming anionic surfactant with high temperature stability and great caustic solubility (up to 35% NaOH and 50% KOH solution). Highly recommended for bleach free alkaline CIP cleaners or any low foaming formulation.

Good non-ionic emulsifiers for oily soils. Cloud point is 59 °C. Has moderate foam.

Low foaming surfactant with a cloud point of 28 °C. Has a cleaning and synergy with Dehypon® LS 36, which can lower the foam behavior as well.

Low foaming surfactant with a cloud point of 33 °C. Can be readily incorporated in highly acidic cleaners. Suitable for low temperature cleaning (less than or equal to 45°C). Final surfactant choice will be formulation dependent as well as temperature of cleaning process.

Provides excellent foam control for Glucopon® surfactant and Deriphat® 160 C. Has a cloud point of 27 °C (5% surfactant in a 25% solution of BDG). Final surfactant choice will be formulation dependent as well as temperature of cleaning process.

Provides excellent foam control for Glucopon® surfactant and Deriphat® 160 C. Has a cloud point of 29 °C (5% surfactant in a 25% solution of BDG). Final surfactant choice will be formulation dependent as well as temperature of cleaning process.

Low foaming surfactant with a cloud point of 33 °C. Final surfactant choice will be formulation dependent as well as temperature of cleaning process.

Provides excellent foam control for Glucopon® surfactant and Deriphat® 160 C. Has a cloud point of 41 °C (5% surfactant in a 25% solution of BDG).

Great caustic stability; won't yellow in direct contact with NaOH beads. It has a cloud point of 40 °C (5% surfactant in a 25% solution of BDG).Final surfactant choice will be formulation dependent as well as temperature of cleaning process.

Provides excellent foam control for Glucopon® surfactant and Deriphat® 160 C. Has a cloud point of 32 °C (5% surfactant in a 25% solution of BDG).

Provides excellent foam control and good wetting. Has a cloud point of 39 °C (5% surfactant in a 25% solution of BDG). Listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice will be formulation dependent as well as temperature of cleaning process.

Low foaming surfactant with a cloud point of 38 °C. Final surfactant choice will be formulation dependent as well as temperature of cleaning process.

Plurafac® LF RA-P is an excellent rinse aid surfactant for plastics. With a superior drying profile, it minimizes the effects of spotting and filming on plastics in industrial and institutional wash applications. With Plurafac® LF RA-P, less time will be spent manually and mechanically drying plastics, translating into cost savings for manual labor and energy.

Low foaming surfactant with a cloud point of 37 °C. Listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice will be formulation dependent as well as temperature of cleaning process.

Low foaming surfactant with a cloud point of 19 °C. Final surfactant choice will be formulation dependent as well as temperature of cleaning process.

Low foaming surfactant with a cloud point of 28 °C. Final surfactant choice will be formulation dependent as well as temperature of cleaning process.  Listed on EPA’s Safer Chemical Ingredients List.

Low foaming surfactant with a cloud point of 47 °C. Final surfactant choice will be formulation dependent as well as temperature of cleaning process.

Moderately low foaming surfactant with a cloud point of 62 °C. Suitable for high temperature cleaning (greater than 60°C). Final surfactant choice will be formulation dependent.

Low foaming surfactant with a cloud point of 18 °C. Listed on EPA’s Safer Chemical Ingredients List. Suitable for low temperature cleaning (Less than or equal to 45°C). Very good synergy with Pluronic N3 specially when used as a rinse aid in low temperature warewash machines. Final surfactant choice will be formulation dependent.

Flex low foaming surfactant with a cloud point of 18 °C. Suitable for low temperature cleaning (Less than or equal to 45°C). Excellent choice for eliminating spotting and filming in automatic dishwashing. Very good synergy with Pluronic N3 specially when used as a rinse aid in low temperature warewash machines. Final surfactant choice will be formulation dependent.

Flex low molecular weight polyethylene glycol.

Polyethylene Glycol with a molecular weight of ~ 4000.

Polyethylene Glycol with a molecular weight of ~ 8000.

Sold as a 100% active product and is suitable for machine floor cleaning as a foam controlling agent. Has a cloud point of 35 °C. Listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice is formulation dependent.

Sold as a 100% active product and is suitable for machine floor cleaning as a foam controlling agent. Has a cloud point of 46 °C. Final surfactant choice is formulation dependent.

Sold as a 100% active product and suitable for low temperature commercial dishwashing machines. Has a cloud point of 29 °C and provides good defoaming and wetting. Listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice is formulation dependent.

Sold as a 100% active product and is suitable for machine floor cleaning as an excellent foam controlling agent. Has a cloud point of 25 °C. Final surfactant choice is formulation dependent.  Listed on EPA’s Safer Chemical Ingredients List.

Pluronic® F 68 PRILL is a difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active and relatively nontoxic.

Sold as a 100% active product and suitable for low temperature commercial dishwashing machines. Low foaming surfactant with a cloud point of 17 °C and provides good defoaming and wetting. Listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice is formulation dependent.

Sold as a 100% active product and suitable for low temperature commercial dishwashing machines. Low foaming surfactant with a cloud point of 20 °C and provides good defoaming and wetting. Listed on safer choice. Final surfactant choice is formulation dependent.

Pluronic® L44 INH is a difunctional block copolymer surfactant with terminal secondary hydroxyl groups. A nonionic surfactant that is 100% active and relatively nontoxic.

Sold as a 100% active product and suitable for high temperature commercial dishwashing machines. Low foaming surfactant with a cloud point of 24 °C. Listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice is formulation dependent.

Sold as a 100% active product and suitable for low temperature commercial dishwashing machines. Provides excellent defoaming and wetting. Low foaming surfactant with a cloud point of 28 °C. Has very good synergy with Plurafac SLF 180, especially when used as a rinse aid in a low temperature dishwashing machines. Listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice is formulation dependent.

Pluronic® P 105 is a difunctional block copolymer surfactant terminating in primary hydroxyl groups.

This hydrophilic surface modification polymer is sold as a yellowish clear liquid of concentration 22%. It is readily biodegradable. The recommended pH of use is 3-10 and concentration at use is 0.5-1.5% as supplied.

This hydrophilic surface modification polymer is sold as a clear to slightly hazy liquid of concentration 40%. The recommended pH of use is 1-14 and concentration at use is 0.1-0.5% as supplied.

This moderately hydrophobic surface modification polymer is sold as a clear liquid of concentration 22%. It has a better electrolyte tolerance than Polyquart 149 and wider usage pH range of 1-14. Recommended concentration at use is 0.2-0.45% as supplied. It is approved for Nonfood use as an Inert with the EPA and can be used in registered cleaning formulations requiring non-food use only.

Liquid product has ~ 30% concentration (solids). Anionic Shear thinning thickener. Can be used between pH 6.5 - 11.5

Liquid product has ~ 50% concentration (solids). Efficient thickening agent for fabric softeners. Can be used between pH 3.0 - 7.0